It can be very frustrating having a locomotive that you need to push to get going or it suddenly speeds up and falls off the tracks.
A locomotive runs by picking up the electricity from the track through its wheels. The wheels transfer the electricity to the motor, which then turns the gears to drive the locomotive.
A locomotive with poor pickup on the wheels or a poor gear set up will give you lots of problems. As with most things, you get what you pay for… but this is one area you do not want to skimp on. A great operating locomotive is 90% of the way to having a fantastic model train layout.
When buying a locomotive these points are critical:
- The amount of metal wheels that pick up the electricity – the more the better, but definitely more than 1 set.
- A good gearing ratio and motor which requires the least amount of electricity to move the locomotive, with a slow but smooth start.
- Flywheels at one or both ends of the motor to ensure a smooth take off and smooth stop.
- The weight of the locomotive should be just right to maintain a good connection to the track at all times but not too heavy to make the locomotive sluggish.
- The length of the locomotive – shorter diesel locomotives are less likely to derail on the curves than longer steam locomotives.
Most hobby shops will let you test the locomotive on their in-house test tracks before you buy.
Test the locomotive forwards and backwards… Check for a nice smooth take off and a nice smooth stop when the power is ramped up or down.
I usually go into my local hobby shop after doing my research online, test the locomotive, and then I negotiate the price… That tip has saved me nearly 30% of the retail price in some cases…
Buy quality when you buy your locomotives… I guarantee the investment will be well worth it.
Article courtesy of “Model Trains for Beginners”